Mitsubishi Electric F930GOT-BWD, Руководство по эксплуатации

Страница: 121 / 342

Graphic Operation Terminal GOT-F900 HPP Mode 10
10-13
Operation example
Monitor the ON/OFF status of inputs X000 and X001, and the current value and set value of
timer T3
n n n n
Important point
1) Monitor function when timers and counters are indirectly specified
If a data register is used for the set value of a timer/counter as
shown in the program on the left, the contents of the data register
are used when monitoring is performed.
When the set value is changed (as described on the next page),
the contents of the data register is overwritten.
Display screen 1
X 000
T 3
X 001
CUR
SET
[ 1234]
[ 2345]
RST( )
Display screen 2
SW1
TIM
SW2
CUR
SET
[ 1234]
[ 2345]
RST( )
ON status
The ON/OFF status of each monitored
device is indicated as follows.
OFF status
HPP MODE
screen is
displayed.
DEVICE MONITOR
Select "DEVICE
MONITOR" on the
screen.
DEVICE
Enter a device
symbol "X".
X
ENT
Select
"X0".
0
Display "X0"
on the screen.
DEVICE
Enter a device
symbol "T".
T 3
Select
"T3".
ENT
Display
screen 1.
COMMENT
Display the
screen 2.
When a comment has been entered to a device,
looth are displayed together.
When a comment has not been entered to a device,
the device is displayed with the symbol.
This comment display function is valid only when
comments have been created using the screen
creation software FX-PCS-DU/WIN-E.
Display "X1" on
the screen.
Paragraph 7.3
D5
D6
T10
C10