Mitsubishi Electric F930GOT-BWD, Руководство по эксплуатации

Страница: 312 / 342

Graphic Operation Terminal GOT-F900 Creation of Display Screen (GT Designer) 20
20-38
20.8 Data input function
The ON/OFF status of bit devices and the current value of word devices in the PLC can be
displayed.
20.8.1 Numerical input function
The data of word devices in the PLC can be displayed in the form of numerics.
u u u u
Contents of setting
1) Number of digits
• Maximum allowable number of digits: 12 “-”(minus signs) and decimal points are each
counted as single digits.)
Number of digits after decimal point
• Enter the number of digits after a decimal point for a case where a decimal point is
displayed.
Example: When the displayed numeric is "2000"
2000 : Number of digits after decimal point = 0
200.0 : Number of digits after decimal point = 1
20.00 : Number of digits after decimal point = 2
2.000 : Number of digits after decimal point = 3
• Install the touch key which allocates key code (002E) when you input the decimal point
by the numeric input operation.(Refer to 9.5.2 for details.)
2) Style
• Select one style among decimal with sign, decimal without sign, hexadecimal, octal,
binary and real (Binary float value).
• Zero suppression
When the zero suppression function is not used, "0" is displayed in each digit position to
the left of the data. The number of "0"
′
s will depend on the specified total number of
digits.
Example:
When the total number of digits is set to 7 and the number of digits after decimal point is
set to 2
0012.34
ß
"0" is displayed in these digits.
• A numeric is displayed horizontally.
High-speed counter
-2147483648
C235 (32 bits)
11 digits 10 digits
If data whose number of digits exceeds the maximum allowable
number of digits is specified to be displayed, "?" is displayed.
to 2147483648