Mitel DT4X3 Скачать руководство пользователя | Manualshive

Страница: 73 / 90

background image

1424-EN/LZT103 089 D1 2016-03-04

Mitel DT4x3 Cordless Phones for MiVoice MX-ONE

73

5

Select one of the following:

• No action - no action will be performed when handset is not in call and placed

in charger.

• Switch off - When the handset is placed in the charger it will switch off. When

it is removed from the charger it will switch on again.

• Sound off

17

- When the handset is placed in the charger it will be muted.

When it is removed from the charger it will switch on the sound again.

• Redirect - Calls can be redirected to another extension when the handset is

placed in a charger. This function must be programmed in the PBX to be able
to redirect calls.

• Change profile - when the handset is placed in the charger it will change

profile. When the handset is removed from the charger, the profile is changed
back.Press "Edit" and select the wanted profile. By default only the profile
Normal is selectable, but additional profiles will be visible if they are
configured. See

8.4

Profiles

on page 54.

9

ADVANCED FUNCTIONS

9.1 ADMIN MENU

The handset has a hidden menu for system administrators. See

the handset’s

Configuration Manual

.

The Admin menu contains:

• Software, hardware, IPEI/IPDI, and user ID
• DECT information
• Centralized Management showing online information
• Site Survey Tool for indication of radio signal and base station listing
• Fault logging
• Frequency band selection

18

• System menu with ability to alter protection
• Factory reset option

For quick access to the Device Information (DI) menu in idle mode, press the keys
containing *#DI# (that is *#34#). For quick access to IPEI/IPDI, press *#06# in idle
mode. See the table below.

17.If the parameter Disable permanent mute is enabled in WinPDM, the handset will not be muted in charger.

18.This option will be removed when the frequency band has been set.

Information

Code

Software version

*#34#

Hardware version

*#34#

IPEI/IPDI

*#34# or *#06#

User ID

*#34#

«
...
71
72
73
74
75
...
»

Содержание DT4X3



























































































Отзывы:

Нет отзывов

Похожие инструкции для DT4X3

Univerge SV8100

Бренд: NEC Страницы: 8

Univerge SV8100

Бренд: NEC Страницы: 19

Univerge SV8100

Бренд: NEC Страницы: 9

Бренд: Talkswitch Страницы: 30

JabloPhone GDP-04

Бренд: JabloCom Страницы: 12

iPhone 200 series

Бренд: Teledex Страницы: 1

Бренд: AT&T Страницы: 71

DCT758-3 - DCT Cordless Phone

Бренд: Uniden Страницы: 84

DECT2060-2 - DECT Cordless Phone

Бренд: Uniden Страницы: 56

Бренд: BT Страницы: 72

Бренд: TCL Страницы: 21

Бренд: Panacom Страницы: 16

Бренд: Kingtel Страницы: 12

Бренд: DMGT Страницы: 3

Бренд: Panasonic Страницы: 4

Бренд: Panasonic Страницы: 4

Бренд: AdvanceTec Страницы: 8

Бренд: Hitachi Страницы: 96

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды