1424-EN/LZT103 089 D1 2016-03-04
Mitel DT4x3 Cordless Phones for MiVoice MX-ONE
62
8.8 SETTINGS
8.8.1 SOUND AND ALERT SETTINGS
Adjust the Ring Volume
Note:
An intrinsically safe handset’s ring volume is lower than a non-intrinsically safe
handset’s ring volume due to current limitations.
1
Enter the menu by pressing "Menu".
2
Select
in the menu.
3
Select "Sound & Alerts.
4
Select “Volume”.
5
Step with to increase the volume and with to decrease it. Press "Back" to
save the setting.
Set different Ring Signals for Internal Call, External Call and
1
Enter the menu by pressing "Menu".
2
Select
in the menu.
3
Select “Sound & Alerts”.
4
Select “Ring signals”.
5
Different signals for internal calls, external calls and call back and PTT can be
set. Select "Internal call", "External call", or "Callback", or PTT. The handset has
14 different ring signals.
Note:
Additional ring signals might be selectable if them are configured via
WinPDM/CPDM3. See the handset’s Configuration Manual for more information.
6
Press "Back".
Set Alert for Messages
1
Enter the menu by pressing "Menu".
2
Select
in the menu.
3
Select “Sound & Alerts”.
4
Select “Message alert”.
5
Select the wanted message alert from the list. By pressing "Play" it is possible to
listen to the different alerts.
Tip:
The option Custom sound should be used you want to create an own
message alert. See the handset’s Configuration Manual for more information.
6
Press "Back".
Turn the Vibrator on/off
If the vibrator is activated, it will vibrate at incoming call and message.
Tip:
It is also possible to activate the handset’s vibrator when receiving a message
during a call via PDM. See the handset’s Configuration Manual.
Note:
When the vibrator is enabled on an intrinsically safe handset, the handset will
alternate between vibration and sound. That is, vibration and sound are not activated
simultaneously.
