1424-EN/LZT103 089 D1 2016-03-04
Mitel DT4x3 Cordless Phones for MiVoice MX-ONE
35
6.3.11 TRANSFER TO NEW CALL
An ongoing call can be transfered to a new number. When the new call is established,
the caller that initiated the transfer will be disconnected.
1
Press "More" during the call.
2
Select "Transfer to new call"
5
.
3
Press "Select".
4
Enter the number to the person the ongoing call will be transfered to.
5
Press
to transfer the call.
6.3.12 CONFERENCE CALL
Prerequisite,
a new call has been started during conversation, see
6.3.5
Start a New
Call during Conversation
on page 33.
By initiate a conference call, an conversation can be made between several
participants simultaneously.
1
Press "More" during the call.
2
Select "Conference call".
Press "Select".The person initiating the conference call is the conference leader, and
the other are participant members of the conference call.
Note!
If
Conference
does not appear when you press "
More"
, you can also do the
following to establish a conference: Press
R
, dial the number to include, and press
3.
6.3.13 CALL WAITING
During an ongoing conversation and a short tone for another incoming call appears, do
as follows:
1
Press "More".
2
Select "Call waiting"
4
.
3
Press "Select". The new call is now connected, and the first call is on hold.
Note:
If
Call Waiting
is not programmed and does not appear when you Press "
More"
,
you can Press
5
to activate. ( France and new Zealand, Press
6
; Sweden, Press
4
)
6.3.14 DTMF
Some systems/PBXs require that the handset sends Dual Tone Multi Frequency
(DTMF) when pressing the keys. DTMF can be enabled as follows:
1
Press the soft key "More" during the call.
2
Select "DTMF".
3
Press "Select". This will enable the use of DTMF.
Tip:
It is also possible configure the handset to send DTMF when pressing
and
pressing/releasing See the handset’s Configuration Manual.
5.Only visible when the parameters "New call" and "Transfer" are defined in the PDM.
