manualshive.com logo in svg

Mitel DT4X3, Руководство пользователя

Поделиться
Скачать
Mitel DT4X3 Скачать руководство пользователя страница 83

1424-EN/LZT103 089 D1 2016-03-04

Mitel DT4x3 Cordless Phones for MiVoice MX-ONE

83

LED Error Indications

See also chapter 

 

LED Indications during Easy Replacement 

on page 79.

LED is flashing red, quick flash, (100 ms on, 800 ms off)

1) If a third handset, that is another handset than the "old" (the replaced handset) and 
"new" (the replacement handset) handset, is inserted into the charger during Easy 
Replacement, this error indication appears. Change to the correct handset.

2) The charger has found that Easy Replacement does not work. Change back to the 
"new" handset.

LED is flashing red, long flash (800 ms on, 100 ms off)

Error during Easy Replacement. Both handsets need to be sent for service.

SERVICE NEEDED
Parameters corrupt.

Note:

 This display 

message is only 
shown in English.

The handset is defective.

Select reset option on the 
middle soft key if available or 
if no reset option is available 
or fault does not resolve the 
handset needs repair. Note: 
Display message only shown 
in English.

Enter PIN code

The handset’s lock is activated. Enter the required PIN code. 

If PIN code lost enter new via 
PDM or do a factory reset via 
PDM.

Battery low, charge 
now

The battery level is low.

Charge or replace the battery.

Phonebook is not 
available at the 
moment.

The phonebook does not 
respond, not available at the 
moment.

Try again later or if fault 
persists do a factory reset via 
admin menu or PDM.

Voice mail number not 
defined

There is no Voice mail number 
defined in the handset.

Define a Voice mail number 
via PDM.

Could not encrypt 
connection

The parameter "Encryption 
Required" is enabled in the 
handset in combination with;
1) Unencrypted base station(s); 
and/or,

2) Unsupported base station(s).

1) Disable the "Encryption 
required" parameter in 
handset via PDM; and/or,

2) Enable the encryption in 
the base station(s); and/or,
 
3) Use supported base 
station(s). Ask your supplier. 

Not allowed

2) The extension (User) does not 
exists.

3) The password is not correct.

2) Make sure that you entered 
correct extension. If needed, 
contact the system 
administrator.

3) Make sure that you have 
entered correct password. 
Ask the system administrator 
if you have forgot the 
password.

Содержание DT4X3



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды