manualshive.com logo in svg

Mitel DT4X3, Руководство пользователя

Поделиться
Скачать
Mitel DT4X3 Скачать руководство пользователя страница 79

1424-EN/LZT103 089 D1 2016-03-04

Mitel DT4x3 Cordless Phones for MiVoice MX-ONE

79

LED Indications during Easy Replacement

The following table shows the LED indications that are used for the handset and the 
charger during the easy replacement procedure. 

3

When the text "Start phone replacement?" is displayed, release 

. 

Press "Yes" (left soft key). 
The text "Follow the instructions. Each step can take several minutes." appears 
in the display. Press "OK" (left soft key).

4, 5

When the text "Please insert old phone in charger" is displayed, replace the new 
handset with the old handset. The handset can either be switched on or off.

Note:

 If the CR3 Charging Rack is used, the left charging slot must be used for 

both handsets.

The handset will be restarted and after a few seconds, the text "Saving settings. 
Do not remove phone from charger" appears. The charger LED changes to slow 
orange flashing. It may take several minutes.

IMPORTANT:

 If the old handset cannot communicate with the charger, put the 

new handset in the charger to restore its settings (that is, the handset’s IPDI). If 
this step is not performed, the new handset must be sent for service. The old 
handset’s settings might be transfered to the new handset by using PDM. See 
the handset’s Configuration Manual.

6, 7

When the text "Please insert new phone in charger" is displayed, replace the old 
handset with the new handset. The text "Restoring settings" is displayed.

IMPORTANT: Do not remove the handset while the text "Restoring settings" is 
displayed

8

 

When the text "Phone successfully replaced. Please remove phone to restart." 

appears in the display, remove the handset from the charger. The handset is 
automatically restarted.

LED indication

Description

Orange, flashing (1 000 ms on, 1 000 ms 
off)

 File transfer during Easy Replacement.

Orange, flashing (100 ms on, 800 ms off) “Change phone” indication during Easy 

Replacement.

Red, flashing (100 ms on, 800 ms off)

Error indication during Easy Replacement. Put back 
new handset in charger.

Red, flashing (900 ms on, 100 ms off)

Error during Easy Replacement. Service needed for 
both handsets.

Содержание DT4X3



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды