1424-EN/LZT103 089 D1 2016-03-04
Mitel DT4x3 Cordless Phones for MiVoice MX-ONE
36
6.3.15 LOUDSPEAKING FUNCTION
There are several options to activate the loudspeaking function:
• When receiving a call, press the left soft key
.
• During a call, press the left soft key
.
• This function can also be activated by selecting another answering method, that is,
"Automatically" and/or "Loudspeaking". See
8.8.5
Answering
on page 67.
7
ALARM OPERATION
The parameters described in this chapter are set in the WinPDM/CPDM3. See the
handset’s Configuration Manual.
Note:
The alarm functionality is applicable for DT423/DT433 only.
7.1 PUSH-BUTTON ALARM
The push-button
can be defined to send an alarm by a long press and by
multiple press. By default, long press is defined for test alarm (see
7.1.1 Test Alarm
),
and multiple press is defined for personal alarm (see
7.1.2 Personal Alarm
).
7.1.1 TEST ALARM
Press and hold the push-button
until a dialog window "Test Alarm" (default) is
displayed. Depending on set parameters;
• a beep is heard
• the orange LED flashes twice
• the vibrator stirs
• the handset receives a notification that the alarm has been received by the system.
This is a system dependent feature.
• if configured, the ALS (see
7.5
Acoustic Location Signal
on page 38) is activated
after the alarm has been sent, or a call is established to a pre-defined number (see
7.6
Automatic Call after Alarm
on page 38)
• information about the handset’s location is sent along with the alarm, see
7.3
Alarm
with Location Information
on page 37.
7.1.2 PERSONAL ALARM
Press the push-button
twice or more, the dialog window "Personal Alarm"
(default) is displayed. Depending on set parameters;
• a beep is heard
• the orange LED flashes twice
• the vibrator stirs
