manualshive.com logo in svg

Mitel DT4X3, Руководство пользователя

Поделиться
Скачать
Mitel DT4X3 Скачать руководство пользователя страница 8

1424-EN/LZT103 089 D1 2016-03-04

Mitel DT4x3 Cordless Phones for MiVoice MX-ONE

8

• In the case of suspected damage, do not use the EX classified handset in a 

hazardous area.

• In combination with EX classified handset, use approved battery types only. The 

battery must have the safety text engraved in the plastic and must have the article 
number 660274.

• Make sure that the product marking corresponds to the site requirements.
• Before installation consult the product documentation.
• National safety rules and regulations have to be observed.
• Do not use accessories to the product without ensuring that they are suitable for use 

in a hazardous area.

• Modification of the product is not permitted.
• Product repair has to be done at authorised repair shops only.

2.3 REGULATORY COMPLIANCE STATEMENTS

Frequency Range

The handset is a radio transmitter and receiver. When it is on, it receives and sends out 
radio frequency (RF) energy. The handset operates on different frequency ranges 
depending on market and employs commonly used modulation techniques:

Chemical Resistance 

The alpha and numeric characters printed on the exterior of the handset have been 
tested and found resistant to chipping, fading or wearing off when the handset is 
treated with common cleaners and disinfectants or perspiration. The following 
chemicals have shown no harmful effect:

• 3% Hydrochloric Acid
• M-alcohol (85% Methylated Ethanol)
• 60% Chlorhexidin 0.5mg/ml

Acetone can be damaging to the plastic casing of the handset and should not be used.

Bluetooth Qualified Design ID

Bluetooth QD ID: B016451

2.4 REGULATORY COMPLIANCE STATEMENTS (EU/EFTA 

ONLY)

The CE marking affixed to Mitel products indicates conformance to the R&TTE 
directive 99/05/EC

EU

1880-1900 MHz

USA

1920-1930 MHz

LA:

1910-1930 MHz

BR:

1910-1920 MHz

--: 1900-1920 

MHz

Содержание DT4X3



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды