1424-EN/LZT103 089 D1 2016-03-04
Mitel DT4x3 Cordless Phones for MiVoice MX-ONE
30
6.1.2 END A CALL
A press on
ends the call. The duration of the call is shown in the display. The total
time of the call can also be retrieved from the Calls menu > Call time.
6.2 OUTGOING CALL
6.2.1 PRE-DIAL
Enter the number and press
to get the line. The number is shown on the display
while dialling. If needed, press "Clear" to erase the number. By using the navigation key
it is possible to step and add/delete a digit in a number.
It is possible to turn on the tone sender in a pre-dialled number by long pressing
.
6.2.2 POST-DIAL WITH HEADSET BUTTON
If a headset is used, it is possible to press its button
2
to get a ring tone and then enter
the number to be dialled.
6.2.3 DIAL USING A PRE-PROGRAMMED NAVIGATION KEY, HOT
KEY, SOFT KEY, OR HEADSET BUTTON
A Navigation key
2
, Hot key
1
, Soft key
1
, or a headset button
3
can be programmed with a
number. Press the pre-programmed key/button to dial the number. The call will
automatically be connected.
6.2.4 DIAL A NUMBER FROM THE CALL LIST
Tip:
It is also possible to dial a number from the Call list by pressing
, selecting a
number in the list, and then press "Call" or
.
1
Open the menu by pressing the "Menu" soft key.
2
Select
.
3
Select "Call list".
4
Select a number.
5
Press
or the soft key "Call" to dial. The number can be edited before the call
is dialled. Press "More" and select "Edit number". The 25 last received, dialled or
missed calls are stored in a call list. See
5.1
Calls
on page 23.
6.2.5 DIAL LAST CALLED NUMBER WITH HEADSET BUTTON
If a headset is used, it is possible to press its button
2
to dial the last called number.
6.2.6 DIAL THE SENDER OF A MESSAGE
It is possible to call the sender of a message stored in the message list.
2.See
8.7
Short Cuts
on page 60 fore more information how to configure the key.
3.The headset button must be configured in the WinPDM.
