FA-300-6L Installation and Operation Manual
51
Command Menu-->Dialer Config
Telephone Line
Note:
Refer to
How to Use the Keypad to Program the FA-300
on page 34 for detailed instructions on
making menu selections.
Command Menu/Dialer-Config/Telephone
Line
1. Line#1 Dialing Type
[X] DTMF Dial->Default
[ ] Pulse Dial
Set the dialing type for line #1;
this is the type recognized or
preferred by the telephone
company.
Command Menu/Dialer-Config/Telephone
Line
2. Line#2 Dialing Type
[X] DTMF Dial->Default
[ ] Pulse Dial
Same as Line#1.
Command Menu/Dialer-Config/Telephone
Line
3. Line#1 wait for Dial tone
[X] ENABLE ->Default
[ ] DISABLE
Use this function to let the
system know whether or not to
wait for a dial tone before
dialing. Cell phone setup for the
dialer requires that the system
not wait for dial tone before
dialing.
Command Menu/Dialer-Config/Telephone
Line
4.Line#2 wait for Dial tone
[X] ENABLE ->Default
[ ] DISABLE
Same as Line#1.
Command Menu/Dialer-Config/Telephone
Line
5.Number of retries
06 ->Default
Set the number of retries for
both line#1 and line#2. This
function lets the dialer retry on
either line if it is busy or not
available. If the retry count
expires, the panel reports a line
trouble.
1 L i n e 1 D i a l t y p e
2 L i n e 2 D i a l t y p e
3 L i n e 1 D i a l t o n e
4 L i n e 2 D i a l t o n e
- T e l e p h o n e L i n e -
5 N u m o f R e t r i e s
L i n e # 1 D i a l i n g T y p e :
[ X ] D T M F D i a l
L i n e # 2 D i a l i n g T y p e :
[ X ] D T M F D i a l
L i n e # 1 W a i t D i a l t o n e
[ X ] E N A B L E
L i n e # 2 W a i t D i a l t o n e
[ X ] E N A B L E
N u m b e r o f R e t r i e s :
0 6