Configuration and CFG-300 LCD Service Tool
40
Command Menu-->Panel Config
Opt Zone
This menu is used to program the process type of the indicating circuits.
Command Menu-->Panel Config
Correlation
Note:
Refer to
How to Use the Keypad to Program the FA-300
on page 34 for detailed instructions on
making menu selections.
Command Menu/
Panel Config
/Opt. Zone
1.Process Type (Indicating
Circuits)
4.
[X] SIL-ABLE->Default
[ ] NON SIL-ABLE
[ ] SIL-ABLE STR
[ ] NON-SIL STR
Use this function to program
the process type of each
indicating circuit.
See CIRCUIT
TYPE section for details.
Command Menu/
Panel Config
/Correlation
1.Correlation
6.
[X] NAC-1 ->Default
[X] NAC-2 ->Default
[X] NAC-3 ->Default
[X] NAC-4 ->Default
Use this function to correlate
initiating circuits to the
indicating circuits. By default all
the initiating circuits are
correlated to all the indicating
circuits.
Indicating Zone
1 NAC-1
2 NAC-2
3 NAC-3
4 NAC-4
N A C - 1 T y p e
[ X ] S I L - A B L E
NAC-4 Type
[X] Sil-able
Z o n e - 1 C o r r .
[ X ] N A C - 1
Zone-6 Corr.
[X] NAC-1