FA-300-6L Installation and Operation Manual
21
Indicators, Controls and Operations
Refer to
Figure 18
below for LED Indicator and Control Button locations.
Figure 18: LED indicators and control buttons
The Main Display Panel on the Main Fire Alarm Control Board consists of:
• 15 common LED Indicators (left half of the display)
• 10 Common Buttons (left half of the display)
• up to six Initiating Circuit Alarm LEDs and six Initiating Circuit Trouble LED Indicators
• Four Indicating Circuit LEDs (labeled NAC- Notifying Appliance Circuit)
• up to ten disconnect buttons (six for initiating circuit & four for indicating circuits)
LED Indicators may be Amber, Red, or Green, and may illuminate continuously (steady), or at one of two Flash
Rates.
• Fast Flash (Supervisory) - 120 flashes per minute, 50% duty cycle
• Trouble Flash (Trouble)- 20 flashes per minute, 50% duty cycle
Note that each display is supplied with laser printer printable paper labels for sliding into the plastic label template
on the panel. For the Main Display, the paper label is
Mircom# NP-2057
; this includes English and French versions.
SYSTEM
RESET
AC ON
X
M
?
GROUND FAULT
CPU FAIL
WALK TEST
COMMON ALARM
COMMON SUPV
REMOTE TROUBLE
COMMON TROUBLE
BATTERY TROUBLE
SIGNAL
SILENCE
AUXILIARY
DISCONNECT
LAMP
TEST
BUZZER
SILENCE
FIRE DRILL
NAC4
(ZONE4)
NAC3
(ZONE3)
NAC2
(ZONE2)
NAC1
(ZONE1)
IAC6
(ZONE1)
IAC5
(ZONE5)
IAC4
(ZONE4)
IAC3
(ZONE3)
IAC2
(ZONE2)
IAC1
(ZONE1)