FA-300-6L Installation and Operation Manual
49
9. Dialer Config (Command-Menu)
The following illustration shows the dialer configuration menu. This menu will show up only if there is a built-in dialer
on the main board. Each item in this menu is described below in detail.
Command Menu-->Dialer Config
Account Info
Note:
Refer to
How to Use the Keypad to Program the FA-300
on page 34 for detailed instructions on
making menu selections.
Command Menu/Dialer Config/Account Info
1.Account# 1 Identification
123456->Default
Use this function to set the Account ID for the
monitoring station to which the dialer reports
events. The maximum # of digits allowed is six.
For contact ID, only the first four digits are
used; the last two are truncated.
Unless you are using the SIA protocol, the
allowed digits for the account ID are simple
digits 0 to 9 and hexadecimal digits A to F (the
SIA protocol only allows digits 0 to 9).
To enter hexadecimal digits, press the INFO
button. The letter “A” will appear. To scroll
through the rest of the letters, press INFO
repeatedly. Press # to move the cursor to the
right or press * to move it to the left.
-Dialer Config-
1. Account Info
2. Telephone line
3. Report Options
4. Time Parameter
5. Enable/Disable
6. Ring Detect
-Account Info-
1. Account#1 ID
2. Account#1 Tel
3. Accnt#1 Format
4. Account#2 ID
5. Account#2 Tel
6. Accnt#2 Format
Account#1 ID
123456