FA-300-6L Installation and Operation Manual
55
Dialer Test Messages
The following messages will display during the test processes of Lines #1 and #2. The messages that will appear
depend on the status of the dialer and the test results that are found.
The dialer is checking the line for voltage. This
message automatically displays when Manual
Test is selected.
No DC line voltage. The line is dead or no phone
line is connected.
The dialer is waiting for a dial tone.
This message may indicate a noisy telephone
line.
The dial tone was received and telephone number
dialing is in process.
This message indicates that the dialer failed to
send a DTMF tone.
Waiting for availability of the receiver. The
receiver confirms the availability by sending an
ack tone.
This message indicates that either the telephone
number may be wrong or the receiver is not
available.
When sending events to the receiver, the display
will toggle between this message and “Waiting for
Kissoff “ for all events sent.
The dialer is waiting for the kissoff tone. The
kissoff tone indicates that the receiver has
received the event reports.
No Kissoff means receiver has not received any
event reports.
The line passed the test; everything is OK.
D i a l e r i d l e n o w
N o D C V o l t
W a i t i n g f o r D i a l t o n e
F a i l e d : N o D i a l t o n e
D i a l i n g R e c e i v e r N o w
N o D T M F t o n e
W a i t i n g f o r A c k t o n e
F a i l e d N o A c k t o n e
R e p o r t i n g E v e n t N o w
W a i t i n g f o r K i s s o f f
N o K i s s o f f
P a s s e d : M a n u a l t e s t