Configuration and CFG-300 LCD Service Tool
52
Command Menu-->Dialer-Config
Report Options
Note:
Refer to
How to Use the Keypad to Program the FA-300
on page 34 for detailed instructions on
making menu selections.
Command Menu/Dialer-Config/Report
Options
1.Alarm priority
[X] Account 1->Default
[ ] Account 2
Use this function to set the
account priority for reporting
alarms. If the priority is set for
account#1 then the dialer will
try account#1 first for reporting.
Command Menu/Dialer-Config/Report
Options
2.Trouble priority
[X] Account 1->Default
[ ] Account 2
Use this function to set the
account priority for reporting
trouble. If the priority is set for
account#1 then the dialer will
try account#1 first for reporting.
Command Menu/Dialer-Config/Report
Options
3.Supervisory priority
[X] Account 1->Default
[ ] Account 2
Use this function to set the
account priority for reporting
supervisory troubles. If the
priority is set for account#1
then the dialer will try
account#1 first for reporting.
Command Menu/Dialer-Config/Report
Options
4.Aux Disconnect, Cancels Alarm
& Supv Reporting Through dialer
[ ] ENABLE
[X] DISABLE ->Default
If this function is enabled, the
Aux Disconnect feature
(obtained by pressing the Aux
Disconnect button) will block
the alarm and supervisory
events from being reported
through the built-in dialer.
- R e p o r t O p t i o n s -
1 . A l a r m P r i o .
2 . T r o u b l e P r i o .
3 . S u p v . P r i o .
4 . A u x . D i s R e p o r t
5 . O p e r a t i o n M o d e
A l a r m P r i o r i t y :
[ X ] A c c o u n t 1
T r o u b l e P r i o r i t y :
[ X ] A c c o u n t 1
S U P V P r i o r i t y
[ X ] A c c o u n t 1
A u x D i s A l m / S u p v R p t .
[ X ] D I S A B L E