Minebea CSD-903-EX, Инструкция по эксплуатации

Страница: 65 / 226

49
Item Function No. Setting value Contents
Operation on 4 steps
comparator F-22
0000 ~ 1111
●
0000
0 : OFF
1 : More than
2 : Less than
10
0
digit
：
Comparator S1
10
1
digit ： Comparator S2
10
2
digit ： Comparator S3
10
3
digit
：
Comparator S4
Operation of 4 steps
comparator S0 F-23
●
0 Always OFF
1 On when both of S1 and S2 output are OFF
2 On when both of S1 and S3 output are OFF
3 On when both of S1 and S4 output are OFF
4 On when both of S2 and S3 output are OFF
5 On when both of S2 and S4 output are OFF
6 On when both of S3 and S4 output are OFF
7
On when (Gross weight)
≧
(Weighing capacity)
Comparator hysteresis
operating conditions F-24
● 0
On delay
1 Off delay
Width of comparator
hysteresis data F-25 00 ~ 99
●
00
Unit : 1D
00 : Hysteresis OFF
Width of comparator
hysteresis time F-26 00 ~ 99
●
00
Unit : 0.1 s
00 : Hysteresis OFF
BCD output operation
mode F-30
● 0
Stream
1 Synchronizing with print
2 Synchronizing with accumulation
3 Synchronizing with finish
BCD output target F-31
● 0 Display interlock
1 Gross value
2 Net value
3 Tare weight value
4 Accumulation total amount
5 Accumulation frequency
BCD output logic F-32 0000 ~ 1111
●
0000
0 : Negative logic
1 : Positive logic
100 digit : Data output logic (Load data and
decimal
point)
101 digit : Polarity logic
102 digit : Flag logic (ERROR, OVER, Stable,
Gross)
10
3
digit : P.C. (Print command) logic
BCD P.C. (Print
command) width F-33 0 125 ms
● 1 25 ms
2 5 ms
BCD output times F-34
●
0 4 times/s
1 20 times/s
2 100 times/s
S-I/F automatic print
operation F-37
●
0 OFF
1 Synchronizing with print signal
2 Synchronizing with accumulation signal
3 Synchronizing with finish signal
●
Has been set as default.