Minebea CSD-903-EX, Инструкция по эксплуатации

Страница: 177 / 226

161
A list of Reading out commands
Item Function No. Number Set value of Return command
Setting the digital filter 70 01 1 ~ 256 (Unit : Moving average time 1 times)
Setting the analog filter 70 02 0 : 2 Hz, 1 : 4 Hz, 2 : 6 Hz, 3 : 8 Hz, 4 : 10 Hz
Display time 70 04 0 : 4 times/s, 1 : 20times/s
Setting of stabilization filter 70 05 1 ~ 256 (Unit : Moving average time 1 times)
Data width of stabilization filter 70 06 0 ~ 999 (Unit : 0.1D)
Time width of stabilization filter 70 07 00 ~ 99 (Unit : 0.1 s)
Lock the key 1 70 08 0000 ~ 1111 (0 : Invalid, 1 : Valid)
10
0
digit : key for ON/OFF
10
1
digit : key for setting
10
2
digit : key for accumulation
10
3
digit : key for the set of tare weight
Lock the key 2 70 09 0000 ~ 1111 (0 : Invalid, 1 : Valid)
10
0
digit : key for tare weight cancellation
10
1
digit : key for net or gross weight
10
2
digit : key for zero set
10
3
digit : key for F
Stability detection data width 70 10 000 ~ 999 (Unit : 0.1D)
Stability detection time 70 11 00 ~ 99 (Unit : 0.1 s)
Operating condition of preset
tare weight cancellation 70 15 0 : Effective, 1 : Invalid
Automatic print operation
70 16
00 ~ 11
10
0
digit : manual print operation effective only in
the stable.
0 : effective only in the stable
1 : always effective
10
1
digit : Automatic print operation.
0 : turn off the automatic printing
1 : automatic printing in the stable
Hold operation 70 17 0 : Synchronizing with Hold
1 : Synchronizing with Batch Finish
Holding target 70 18 0000 ~ 1111(0 : Invalid, 1: Valid)
10
0
digit : Display
10
1
digit : Comparison result
10
2
digit : CC-Link interface
10
3
digit : Serial interface
Please change [7*] of above mentioned command to [8*] about the command at the time of
writing.