Minebea CSD-903-EX, Инструкция по эксплуатации

Страница: 184 / 226

168
Item Function No. Number Contents
Weighing mode 72 01 0 : Simple comparison mode
1 : Sequential mode
2 : 4 steps comparator mode 1
3 : 4 steps comparator mode 2
Control mode 72 02 0 : Batch mode, 1 : Discharge mode,
2 : External input changeover
Comparison signal operation 72 05 0 : ANYTIME, 1 : IN STABLE MODE,
2 : SYNC. WITH BATCH FIN,
3 : BATCH FIN.+HOLD
Near zero comparison operation 72 06 0 : Gross, 1 : Net, 2 : OFF, 3 : |Gross|,
4 : |Net|
Full comparative operation 72 07 0 : Gross, 1 : Net, 2 : OFF, 3 : |Gross|,
4 : |Net|
Batch Monitoring Timer 72 10 0000 ~ 9999 (Unit : 1 s)
Start above near zero at the time
of batch start 72 15 0 : Invalid, 1 : Effective
Automatic tare at the time of
batch start 72 16 0 : Invalid, 1 : Effective
Batch start delay timer 72 17 0000 ~ 9999 (Unit : 1 s)
Automatic tare after batch start
delay timer 72 18 0 : Invalid, 1 : Effective
F-flow compare stop timer 72 20 0000 ~ 9999 (Unit : 0.01 s)
M-flow compare stop timer 72 21 0000 ~ 9999 (Unit : 0.01 s)
D-flow compare stop timer 72 22 0000 ~ 9999 (Unit : 0.01 s)
Automatic free fall compensation 72 25 0 : Invalid, 1 : Effective
Width for the automatic free fall
compensation 72 26 00000 ~ 99999 (Unit : 1D)
The command of writing is changing the upper commands [7*] to [8*].