Minebea CSD-903-EX, Инструкция по эксплуатации

Страница: 175 / 226

159
・
Please enter the set value by right justify.
・
Please do not put the decimal point.
・
Please set the stored place to the internal RAM when the set value is continuously changed, and the
rewriting time of EEPROM might exceed about one million times.
・
Please do not change in the set value under the measurement because the A/D sampling rate
decreases temporarily while rewriting the set value. Please set the storing place to the internal ROM
when you change the set value during the measurement.
・
To write the effective brand number for [Command No. 69], set function F-51 to [2].
・
Comparison value setting data writing allows the setting to be changed for the brand number
selected by the setting brand number in [Command No. 6A].
The condition of the error transmission becomes as follows.
・
When there is a disagreement in the scale interval value.
・
When you set the value that exceeds the specified value.
・
When you set characters other than the numerical value in the set value.
・
When you set characters other than +/- in sign part.
(11) Reading out set values (host → CSD-903)
2 4 6 8 10 12 14 16
@ 0 0 7 0 0 1
Terminator
At normal operation
Return (CSD-903
→
host)
2 4 6 8 10 12 14 16
@ 0 0 7 0 0 1
Terminator
Command No.
Address
00 to 31
No.
Space
Address
00 to 31
Command No.
No.
Setting value
Sign