Mindray Accutorr 7, Руководство оператора

Страница: 94 / 200

9 - 8 Accutorr 7 Operator’s Manual
9.7.7 Setting the Pressure Unit
1. Select [ Main ]
→
[ General Setup >> ]
→
[ Unit Setup >> ].
2. In the popup menu, select [ Pressure ] and toggle between [ mmHg ] and [ kPa ].
9.8 Assisting Venous Puncture
You can use the NIBP cuff to cause sub-diastolic pressure to block the venous blood
vessel and therefore help venous puncture.
1. Select [ VeniPuncture >> ] from the [ NIBP Setup ] menu. In the pop-up menu,
verify that the [ Cuff Press. ] value is appropriate. Change it if necessary.
2. Select the [ VeniPuncture ] key
.
3. Puncture vein and draw blood sample.
4. When the puncture is complete, select [ VeniPuncture ] key, or press the
hardkey on the monitor's front panel to deflate the cuff. The cuff deflates
automatically after a set time if you do not deflate it.
During puncture, the NIBP display shows the real-time inflation pressure of the cuff,
destination inflation pressure, and the remaining time in venous puncture mode.
9.9 Care and Cleaning of Reusable Cuffs
Accuracy of cuff-pressure transducers/indicators is to be verified at intervals specified by
the manufacturer.
9.9.1 Reusable Cuffs with Bladders
Take out the bladder before cleaning and disinfecting the cuff.
9.9.2 Cleaning
Hand or machine washes the cuff in warm water or with mild detergent. Clean the
bladder with a damp cloth. Air dry the cuff thoroughly after washing.
NOTE
•
Machine washing may shorten the service life of the cuff.