Mindray Accutorr 7, Руководство оператора

Страница: 89 / 200

Accutorr 7 Operator’s Manual 9 - 3
■
Rapid blood pressure changes
■
Severe shock or hypothermia that reduces blood flow to the peripheries
■
Obesity, where a thick layer of fat surrounding a limb dampens the oscillations
9.4 NIBP Measurement Mode
There are the following modes of measuring NIBP:
■
Manual: measurement on demand.
■
Auto: continually repeated measurements at set intervals.
■
STAT: continually rapid series of measurements over a five minute period, then
return to the previous mode.
■
Program: continually automatic measurement at set durations and intervals.
To set NIBP measurement mode, select NIBP parameter area to access [ NIBP Setup ]
menu:
■
Select [ Interval ] to select manual mode or auto NIBP measurement interval.
■
Select [ NIBP STAT ] to start a continuous NIBP measurement.
9.5 Measuring NIBP
9.5.1 Preparing the Patient
In normal use, perform NIBP measurement on a patient who is in the following position:
■
Comfortably seated
■
Legs uncrossed
■
Feet flat on the floor
■
Back, arm and feet supported
■
Middle of the cuff at the level of the right atrium of the heart
.
NOTE
•
It is recommended that the patient relax as much as possible before the NIBP
measurement is performed and that the patient does not talk during
measurement.
•
It is recommended that the patient sit still for 5 min before the first
measurement is taken.
•
The operator should not touch the cuff and tubing during the NIBP
measurement.