Mindray Accutorr 7, Руководство оператора

Страница: 48 / 200

4 - 2 Accutorr 7 Operator’s Manual
◆
If no matching patient MRN is found in the ADT server, the message ‘Failed
to obtain patient information’ will display.
3. Select [ Ok ].
You can configure the [ Patient Demographics ] menu.
1. Select [ Main ]
→
[ Maintenance >> ]
→
[ User Settings >> ]
→
enter the required
password
→
select [ Ok ] to access [ User Settings ] menu.
2. Select [ Patient Demographics >> ].
3. Select the desired items in [ Patient Demographics ] menu.
◆
[ Required Information ]: these items are required when you send the data
to the eGateway.
◆
[ Optional Information ]: these items are optional and not required when
admitting a patient
.
You can also customize four options as optional
information.
4. Select to save the configuration and exit the menu.
NOTE
•
In the Patient Demographics menu, the items with the '*' symbol indicate a
required field. The patient data cannot be sent to eGateway until all the
required data is entered.
•
If a clinician ID is entered, but there is no activity on the monitor for a
configured period of time, the monitor clears the clinician ID. Refer to
3.6.3 Configuring the Timeout of Clinician ID .
4.1.2 Admitting a Patient by Barcode Scanner
The monitor provides the ability to admit a patient through linear or two-dimension
barcode scanner.
NOTE
•
If the patient demographics are obtained from barcode scanner, the patient
demographics cannot be changed.
4.1.2.1 With Linear (1D) Barcode Scanner
To admit a patient with a 1D barcode scanner, follow this procedure:
1. Connect the barcode scanner to the USB connector on the monitor.
2. Aim the barcode scanner at the barcode.
3. Select [ Ok ] on the [ Patient Demographics ] menu to admit the patient.