MM560 Installation Instructions
18
Mounting Push-to-Open Opener to Gate
Push-to-Open Installation
Your Property
12
Y
S
T
R
13
2
1
2
1
Attach and secure opener assembly to brackets.
Attach gate bracket assembly to gate cross support.
Check for level. Adjust post bracket if necessary.
Remove bolt excess length on post and gate bracket with
hacksaw. After the bolts are trimmed, remove the opener from
the gate.
14
15
2
1
1
2
J
1
Fully open gate.
On push-to-open gates attach gate stop on the
outside of the gate with one of the following:
• U-bolts—tube and chain link gates (Not included)
• Wood/lag screws—flat aluminum/wood supports (Not included).
Do not tighten.
Position gate stop with gate CLOSED to fence post. Tighten
fasteners. Cut off excess bolt length.
Return the gate to the full closed position and reinstall the
Mighty Mule.
Closed Position Stop Plate Installation
