manualshive.com logo in svg

Mighty Mule MM560, Руководство по установке

Поделиться
Скачать
Mighty Mule MM560 Скачать руководство пользователя страница 25

 

MM560 Installation Instructions

  

22

10’ 

Max

1

Install Receiver within 10 ft of control box (longer lengths 

available - call us). 

NOTE: NEVER splice receiver cable. DO 

NOT run cable through metal conduit because the receiver 

signal range will decrease. DO NOT run cable through conduit 

containing AC wire. DO NOT place receiver within 3 feet of AC 

power.

2

W

W

Check Receiver/Remote signal reception in mounted position/OK—

secure Receiver in position to fence or post. 

NOTE: If mounting 

on metal fence, mount receiver on a piece of wood. Mounting the 

receiver on metal can cause interference and the receiver may not 

work properly. DO NOT mount upside down.

Control Box Installation

Receiver Installation

Tips

1. Mount the receiver high and above any obstructions; fence 

pickets, column caps, etc.

2. If radio control seems limited try moving the receiver 1-2 feet 

in each direction to reduce radio noise “dead spots”.

NOTE: Once you have completed the installation, you may need to relocate the receiver to    

       get better distance.

Consider the following when mounting the receiver:

•  Standard receiver cable length is 10 feet (receivers with a longer cable are available as special 

order items; 

call the Mighty Mule Sales Department

).  NEVER splice receiver cable!

•  

Run the cable through PVC conduit to protect it from damage.

 

•  DO NOT run cable through conduit containing AC wire.

•  DO NOT place receiver within 3 feet of AC power.

•  DO NOT coil excess cable or store it in the control box.

• 

Do not mount upside down.

•  The receiver range can vary depending upon weather, topography, and external interference.

Содержание MM560













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды