Preparing the appliance
Before installing and connecting the appliance, please read
the section "Plumbing in the appliance".
Fitting the inlet hose
The water inlet hose connection is located on the top
left-hand side on the back of the appliance.
^
Attach the connecting nut of the stainless steel hose to the
screw thread.
Make sure that it is screwed on tightly.
Fitting the drain hose
The water drain hose connection is located on the bottom
left-hand side on the back of the appliance.
^
Attach the hose to the drain connection on the appliance,
and secure it with a hose clip.
Installing and connecting the appliance
^
Connect the mains connection cable to the appliance.
^
Feed the water inlet and drain hoses through the cut-out in
the base of the building-in recess.
^
Push the appliance into the recess and align it.
Make sure that neither the mains cable nor the water hoses
are trapped or damaged.
The appliance must be level so that the steam generator
can work properly.
There must be no more than a 2° deviation from the
horizontal.
Installation and connection
173
Содержание TX3587
