ALAN MAP 600
user’s manual
6
9
9
1
1
0
0
1
1
1
1
1
1
2
2
1
1
3
3
1
1
4
4
9
9
3.1.2 Back Panel and Connections
[9] Threaded junctures
– for mounting on the bracket
[10] Data socket
(on the bottom of the receiver, under the
protective cap) – for connecting to a PC via the DL 500 cable
for
downloading of maps and various data, using a standard NMEA.
[11] 3V max socket (on the bottom of the receiver, under the
protective cap)
- 3VdC socket for recharging Ni-MH batteries
using a suitable AC battery charger (or DC cable adaptor).
[12] Lever on battery well cover
– for opening the battery
compartment.
[13] Battery compartment
– for insertion of 2 AA batteries, either
alkaline or rechargeable Ni-MH.
[14] ] External antenna socket
– for the connection of an active
external antenna, for use when there is insufficient visibility of the
sky (e.g., inside a vehicle).
Do not connect the battery charger when using normal alkaline batteries
(or other non-rechargeable batteries) as this may damage the
equipment.
Remove the protective cap from the sockets only when using them; this
will avoid exposure to humidity or other damaging agents.
Do not remove the batteries before switching off your MAP 500! All the
internal settings, the new waypoints and routes are in fact permanently
saved in your MAP 500 only in the switching off.
