ALAN MAP 600
user’s manual
13
7.1.6 Language
With this feature, you set the language of the GPS menus. Italian,
English, Spanish, Dutch, German, French are available.
7.1.7 DMS Format
The attitude for the view settings (traditionally) degrees, minutes,
seconds of
DD MM SS.S
or in the today wide-spread decimal
minute mode of
DD MM.M
.
7.1.8 WAAS / EGNOS
Activates the setting for the additional indicator correction by
special geostationary satellite signals.
a.
On
- additional satellite signal correction is switched on (in
case of receiption appears DGPS)
b.
Out
- without additional correction signal this setting is
always recommended if user does not know exactly
whether a WAAS or a EGNOS signal is receiptable at
present.
7.1.9 Buzzer (acoustic Signal)
Here the acoustic Signal could be defined. The following options
are available:
a.
Message
(Beep to inform the user about messages)
b.
Key
( beep by pressing buttons)
c.
Bouth
(Key and Message together)
d.
Off
(no acoustic Signal
)
7.1.10 Changing Coordinate format
Normally, latitude and longitude are used to
define a geographical position, although other
systems exist which may be selected for special
applications. In addition, you can still choose
further internationally used systems, e.g. the
German Gauss Krueger system, the Austrian, Swiss,
the British and the UTM system, who are
automatically linked with the associated map
data. The basic adjustment is recommended only
if it is necessary to change the coordinate format.
Move the cursor left/ right to select the window
Format
. Use the
cursor up/down and the
button to select the standard
desired and confirm with
OK.
7.1.11 Changing map references (Datum)
Maps are created using different standards. The
most common one is
WGS-1984
(World
Geodetic System 1984), used by most GPS
devices. For this reason we suggest not
changing it as long as it suits your particular
needs, as selecting an incorrect standard may
result in measurement errors. To select other
standards move the cursor left/ right and select
the window
Datum
. Use the cursor up/down
and the
button to select the standard
desired and confirm with
OK.
In the appendix you can find all available Map600 references (Datum).
The manual changing of the Waypoint Coordinates are only possible, if
WGS 84 is selected.
7.1.12 Set AR
On the Page Set AR (Settings for Auto-Routing)
the following setting could be selected:
a.
Route optimise
, to calculate the optimal
Route,
b.
Avoid Highways
, to drive on smaller
Streets,
c.
Auto-Zoom-In
, to zoom in at the corner
and
d.
Road Match
, to use the Auto-Routing
beside streets.
