ALAN MAP 600
user’s manual
26
9.6
Narrowing waypoint list
If you have a number of waypoints programmed, you can
narrow the list to reach the ones you wish to modify or delete
more easily.
For example, when at step one in par.9.2, you see a list of
waypoints:
1. Ensure the
Name
field is highlighted, as described above (not
the list of waypoints), and press
.
2. Use the Joystick to change the characters in the
Name
field to
view only the waypoints which contain the same characters in
the same position on the list. The character _ (underscore)
automatically accepts any character.
Example: you have 5 waypoints with these names:
• W001
• W002
• PORT
• HOME
• LIGHTHOUSE
If you insert
_ O _ _ _ _ _ _
into the
Name
field, you will see only
the waypoints
PORT
and
HOME
(because the second letter is O);
if instead you insert
W _ _ _ _ _ _ _
into the
Name
field, you will
only see the waypoints
W001
and
W002
.
10 ROUTES
The Map600 allows to create two different types of Routes:
c.
normal Routes
includes two or more waypoints to show
the Way to the Endpoint. On this way you can create 50
Routes with up to 150 Waypoints per Route. So the Route
shows the way from Waypoint to Waypoint until you
reached the goal. The information for the Route you can
see during the Navigation on the map- or compass
page.
d.
Auto-Routes
are defined with a Start- and Endpoint
(Middle points). You can save up to 20 Auto-Routes with
automatically guiding along streets. By Moving the Route
will by continuously displayed in the map or bigger in the
arrow guide display with information about the direction
distance and next street name. If necessary the route will
be recalculated again.
Bouth Routes could be managed with help
of the Route Manager. To open the Route
Manager press on every main pagetwo
times the
button, or on time
and
select with the cursor Main Menu and
confirm with
. Choose
Routes
and press
.
