ALAN MAP 600
user’s manual
11
7 Navigating the command menus
Each page displays a series of options and settings, accessed
through the command menu.
The procedure for navigating the menus is as follows:
1. Press the
(menu) button: the display will show the menu
options for the selected page.
2. Move the Joystick up/down to highlight the desired option.
3. Press
(confirm) to activate the option.
4. Select other options as desired, repeating steps 2 and 3, as will
be further described ahead in the paragraphs outlining each
function. When using this function, you can go back to a
previous level by pressing
ESC
.
The last two options, Setting and Main Menu, are available on every page
and allow for, respectively, personalizing your GPS (backlighting mode,
map orientation, units of measurement, etc) and for quick access to
frequently used functions (geographical reference settings, routes, etc).
Pressing twice quickly provides quick access to the Main Menu from any
page.
Occasionally, you will be asked to confirm or cancel settings you have
selected, pressing the check or cross buttons respectively. These functions
can be enabled using the Joystick and the button.
7.1 Menu
Settings
This menu allows the user to personalize their receiver according
to their needs and for optimum function of the device. This can
be called up from any main page, as described above.
The following options are explained in further detail below:
1. From any page, press
, then select
Setting
using the
Joystick.
2. Press
to confirm.
3. Move the Joystick up/down or left/right to highlight the
desired option and press
. A list of available settings
will appear.
