ALAN MAP 600
user’s manual
22
8.4.2 Trip
Reset
MAP 600 is equipped with a special timer which records when
you begin using your receiver to navigate and uses this to derive
certain information (e.g., average trip speed, distance travelled
from the beginning of the trip, etc). Obviously, to receive
accurate information from this data, you must reset the timer
when you begin a new trip. To use this function, go to the
Data
page and press . Using the Joystick, select
Trip Reset
, then
press
. The timer will be reset and all of the new data will be
displayed correctly.
8.4.3 Change
field
Al the data could be selected and shown. Press the
button,
select
Change Field
and confirm with
. Afterwards select the
wanted field, press the
button and chose information by
Moving the Kursor (up/down) and confirm your choise with
.
8.5
Compass Page
When you are navigating using a route or the GoTo function to
waypoint, the
Compass
page helps to hold your course with
respect to the next waypoint by indicating the direction of
movement, the distance, and other useful parameters which
help you to maintain the set route.
The references are as follows):
a.
NEXT WP
- Shows the designation of the
nearest waypoint (route) and/or
selected waypoint (GoTo, lower
picture).
b.
TO NEXT
– these two fields show the
distance to the next waypoint and the
estimated time of arrival.
c.
TO DEST
– these two fields show the
final distance and the estimated time
of arrival.
d.
Compass needle
– shows the direction
of the next waypoint.
e.
Direction indictor
– shows the direction of navigation (the
circle with the cardinal points underneath moves below
it).
8.5.1 Menu of the Compass Page
Pressing the
button accesses the following options, which you
can highlight with the Joystick and activate using
.
a.
Change Next WP
– For selecting a different waypoint
than the one chosen in order to monitor the various legs
of the route.
b.
Setting
– For access to the settings menu.
c.
Main Menu
– For access to the main menu.
