ALAN MAP 600
user’s manual
14
7.1.13 Time
The GPS constellation allows to read data and
time with extreme precision. Time is based on the
Greenwich meridian, so if you are located in
another time zone, you will be obliged to insert a
time zone difference (for Italy an hour more). To
select other time move the cursor left/ right and
select the window
Time
. (picture) Use the cursor
up/down and the
button to select the time
and confirm with
OK.
a.
Plus/Minus
– defines if the time zone difference is plus or
minus Greenwich Mean Time.
b.
Hour
– hours of difference with respect to the Greenwich
meridian
c.
Minute
–minutes of difference with respect to the
Greenwich meridian (for use only in special applications)
7.2 Main
Menu
The Main Menu could be chosen from every
main Page, by pressing two time on the
button or on time
and selecting
Main Manu
with the Cursor and confirm with
. The Main
Menu contains the Quick Selection of the
mostly used options (like waypoints, routes,
Track Logs ...) with the Cursor an the
button. In the picture all Options are shown.
Waypoints
(geographical references) – creation
and use of geographical references (waypoints).
Routes
– creation and use of routes composed of various
waypoints.
Track log
– for automatic tracking of the route followed
(independently of the route programmed in Routes).
Satellite
– option to open the satellite page
Stop Navi/navigation
– allows the changing of the Navigation
Mode
Cold Start
(initialization).
Files in CF
(File Manager)– allows to manage the files on the CF-
Card. E. g. if more than one map file is stored the wanted file
can be selected by using the cursor (up/ down) and the
button.
LCD Level
– to change the display contrast by moving the cursor
(left/right) and confirming with
.
About
(Viewing of system information) – viewing of map version,
map utilised, software version, and other
data from the receiver.
Loading
(downloading of data) – for
transferring data (maps, waypoints, routes,
tracks, etc) from a PC to your GPS, and to
update MAP 600’s operating system using
optional software and cables. For further
information, refer to the instructions supplied
with these accessories.
To modify an option:
1. Press from any page twice
to call up the main menu or
press once
, highlight
Main Menu
with the Joystick and
press
.
2. Use the Joystick to select the option desired.
3. Press
to confirm and
ESC
to leave the menu.
Follow the directions in the paragraph below regarding the
option selected.
