![Midea MVUR252B-VA3 Скачать руководство пользователя страница 135](http://html1.mh-extra.com/html/midea/mvur252b-va3/mvur252b-va3_service-manual_1791261135.webp)
MIV V5 Heat Recovery DC Inverter R410A
DM14-01.01.18en
133
MS Unit Installation
1. Select installation position
1. A place can provide enough installation and maintenance space.
2. Horizontal ceiling and its building construction is able to withstand the set’s weight.
3. A place where the connecting pipes and drain pipes can be connected easily.
4. The installation location should consider the length of the refrigerant pipe connected with the outdoor and
indoor units; it cannot exceed the limited length range.
Note:
Do not install the MS near the strong electromagnetic interference environment, otherwise will cause the MS
communication error.
For the MS may produce refrigerant noise, please do not install it at the silent places, such as sleeping room, hospital
sickroom, dedicated silent room etc., recommend installing it at the corridor or washing room etc.
Be sure to install drain piping in order to ensure proper drainage.
Improper drain piping may result in water leakage and bedewing furniture etc.
Be sure to install an earth leakage breaker. Failure to install an earth leakage breaker may result in electric shocks.
Do not install the MS at any place where flammable gas may leak out.
If the gas leaks out and stays around the MS, a fire may break out.
Be sure to install at a strong and firm foundation or ceiling base. If the foundation or ceiling base is not strong and firm
enough, the set will drop to cause injury.
Connect the electric cable correctly. If wrong connecting the electric cable, then it will damage the electrical components.
Expose the unit to the water or other moisture before installation will lead to the short circuit of the electrical components.
Don’t store the unit in the humid basement or expose to the rain or water. If refrigerant leaks happen during installation, then
ventilate the room immediately.
After finishing the installation work, be sure to check whether the refrigerant leak or not. If refrigerant leak and is exposed to
the fire source such as heater, fire pot or electric cooker etc., then will produce toxic gas.
2. Installation space
Unit: in.(mm)
Unit: in.(mm)