Operating instructions iQ-Oval CDS V1-4.docx
page 50 of 66
The following keys and knobs with a fixed function are available:
Key
Functional description
INLET MODE is used for the sequential start of a new print
job/run. It activates each selected print station/flash cure
unit in sequence when commencing a production run.
After the first complete printing cycle with all enabled print
stations/flash cure units, the startup mode will be turned
off automatically.
OUTLET MODE is used to switch off the print stations one
by one when print job is finished.
SAMPLE starts a sample print. The desired amount can be
increased by pressing the button “Sample” more often.
The actual adjusted amount is displayed at “Produce”. The
sample will automatically perform the required inlet and
outlet mode, the manual adjustment is not necessary.
Pressing CLEAN initiates a “half
-
index” of the tables,
particularly useful for cleaning the screens. In clean
position it is possible to move the tables manually.
Pressing CLEAN again moves the tables back to its original
position even when tables were moved manually.
Starts an index and a working cycle. In Manual-mode only
one index and working cycle will be made. In Automatic-
mode index and working cycles start continuously.
Interrupts the running print job in Automatic-mode after
the actual working cycle is finished.
Turning SELECT changes the display or switches between
different input fields. Push knob so select actual field.
Turning SET changes a selected input field. Push knob to
save changes.
