Operating instructions iQ-Oval CDS V1-4.docx
page 23 of 66
7.7.
Pallets
The substrates must be applied on the pallets. Depending on the substrate size
different pallets must be used. By default, pallets with format 52x100cm, 75x120cm or
85x140cm made of aluminum in honeycomb structure and a thickness of 17mm are
used. The maximum allowed pallet weight is 11kg.
7.8.
Footswitch
At the control panel socket a footswitch can be connected. The footswitch is used to
start an index movement when machine runs in manual mode. In automatic mode
the index movement can be blocked.
7.9.
Main Power Switch
The main power switch is mounted at the base frame. It disconnects the machine
from the main supply voltage immediately.
7.10.
Type Plate
The type plate with type, serial number, year of manufacture, mains voltage, mains
frequency, connected load and CE symbol is located on the base frame.
Exceeding the maximum allowed weight of the pallets would
increase the dynamic load to the machine and can cause material
damage. The maximum weight of the pallets must be observed.
Only pallets provided by MHM must be used for production.
