Operating instructions iQ-Oval CDS V1-4.docx
page 35 of 66
If any work is to be carried out with or on the machine that requires entering or
placing one's hands into any of the danger zones, make sure that the machine is
stopped and restart is blocked by at least one of the following conditions.
1.
The Control ON/OFF switch has been switched OFF.
2.
An emergency stop push button has been pressed.
9.
Control of the Machine
This section explains the control features of the machine from the control terminal.
9.1.
Starting up and shutting down the iQ-Oval CDS
The following points must be observed:
•
Prior to each start-up, any possible defects of the iQ-Oval CDS must be rectified
by authorized staff.
•
The start-up of the machine must only be carried out by qualified and trained
personnel knowing and observing all safety instructions.
•
It must absolutely be ensured that only authorized persons are permitted in the
work area of the machine, and that starting the machine will not endanger
anybody.
•
The functioning of all safety facilities/devices must be checked.
•
All tools and foreign parts must be removed from the machine prior to its start-
up.
•
The operators must be aware of the function and position of all safety
devices/facilities.
This section illustrates the most important of the command screens,
not all of which may be illustrated due to the very complex software.
The command screens not illustrated in particular are those of a self-
explanatory nature.
