Operating instructions iQ-Oval CDS V1-4.docx
page 30 of 66
For additional settings a submenu can be called up by first pressing the right turning
knob, keep it pressed and then press the left turning knob.
Turning the left knob changes the selected parameter. To choose parameter press the
left knob, turning the right knob will change the value. Press the right knob to safes the
changes. Press the left knob to return to initial value. Exit submenu with button
“
ADJUST
”
.
The following parameters are available:
•
„Color Type“
: Adjust the used ink. At Plastisol print cycle will start with flood stroke
followed by a print stroke. Waterbased starts with a print stroke followed by a flood
stroke.
•
„Sque Delay“
: Delay time for squeegee movement. Time is necessary to bring
squeegee in down position before movement starts. Enter in 1/100 of a second.
•
„SqueMidFront“
: Switching time for outer center position. Enter in 1/100 of a
second.
•
„SqueMidRear“
: Switching time for inner center position. Enter in 1/100 of a second.
•
„LiftDelay“:
Delay time for lifting or lowering the screen. Enter in 1/100 of a second.
