MG Gloster, Руководство пользователя, Страница: 99 / 264

90 91
BEFORE YOU DRIVE
In the OFF state, the tempe and- buttons are invalid, in other
states, the tempe and - buttons can adjust the temperature, but
do not change other states of the controller.
Press the tempe button once, the set temperature will increase
by 1 level, and it will change continuously after long pressing the button
for 1 seconds.
Press the temperature - button once, the set temperature will decrease
by 1 level, and it will change continuously after long pressing the button
for 1 seconds.
Rear A/C air volume adjusting buttons
Adjust the air volume, there are 6 levels for each button.
The air volume of A/C increases by one level once the air
button is pressed; the air volume decreases by one level once the air
volume- button is pressed.
When long pressing the air button for more than 1 second,
the air volume will continuously increase to the 6th level by changing 1
level every 0.5 second.
When long pressing the air volume - button for more than 1 second, the
air volume will continuously decrease to the 1st level by changing 1 level
every 0.5 second.
Press the air volume button int the OFF state, the controller will exit the
OFF state and return to the state before OFF, and the air volume level
before OFF in memory will be recalled.
In the OFF state, by pressing the air or- button, the controller
will enter the ON state, and the air volume output will gradually
increase from the 1st level to the one before OFF in memory, and other
functions maintain the state before OFF.
Rear A/C mode button
Change the air distribution state of the damper, press the mode button
to switch to the following air distribution state of the damper in
sequence: Distribution to Face mode, Distribution to Face and Feet
mode, Distribution to Feet mode.
Rear A/C AUTO button
After pressing the AUTO button, the A/C enters the AUTO control
mode, the AUTO icon is displayed on the LCD.
In the AUTO state, press either of the mode, air volume button, the
corresponding function will exit the AUTO mode, and other functions
remains unchanged, the AUTO icon on the LCD will go out.
Rear A/C panel OFF button
Used for power on/off, in the OFF state, press the mode button again,
and the heating and cooling buttons will not respond.
Press the OFF button to switch to the OFF state, the LCD output is
closed, the air volume is in 0 level, and the mode motor, the heating and
cooling motor stops after running to the position set before OFF.
In the OFF state, operate the air volume button or AUTO button to
enter the On state, the air volume, mode, AUTO, set temperature will
resume to the state before OFF.
Electronic A/C rear control panel
BEFORE YOU DRIVE
1 Rear A/C tempe selection button
2 Rear A/C display
3 Rear A/C air adjusting button
4 Rear A/C temperature - selection button
5 Rear A/C mode button
6 Rear A/C panel OFF button
7 Rear A/C air volume - adjusting button
Note: Please refer to “Automatic A/C Rear Control Panel” in this
section for the operating and control logic of the functions
contained in this control panel.
Recommendation for A/C Operation
• If the vehicle is parked in a place that is exposed to the direct
sunlight, open the windows before operation.
• If the fogged windows need to be cleaned in a rain day, reduce the
moisture in the vehicle by operating the air conditioning.
This is very effective in rainy season and a season with heavy
moisture.
• If the vehicle is driving in the city, the stop-and-go may cause
the insufficient cooling.
Note: If the air conditioning will not be in use for more than one
month, run the engine at idle speed and turn on the system for
more than 10 minutes (once every month, including in winter). This
aims to maintain the proper lubrication of the compressor and the
seals, so as to extend the service life of the system.
Note: Condensation may be formed on the evaporator when the
A/C is operating. So you may find a small pool of water under the
vehicle after the vehicle is stopped.