MG Gloster, Руководство пользователя, Страница: 103 / 264

94 95
BEFORE YOU DRIVE
Interior rearview mirror
Adjust the rearview mirror to obtain the required rear view.
Manual adjustment of interior rearview mirror
Operate the adjusting lever on the bottom of rearview mirror to reduce
reflected glare during night driving.
Power adjustment of Interior rearview mirror
For vehicles equipped with power adjusting interior rearview mirror,
press the AUTO button (2) on the rearview mirror bottom. Then the
green LED lamp (1) will illuminate and rear light sensor will start
operating to reduce reflected glare during night driving. Press the button
(2) again. Then the green LED lamp will go off and rear light sensor will
stop operating.
Interior Devices
Ceiling reading lamps
Front ceiling reading lamp
Turn on the reading lamp
Press to turn on the internal reading lamp.
Turn on door control mode
Press , the internal reading lamps will automatically illuminate after
any one door is opened, and go out approximately 30 seconds after the
door is closed.
With the doors closed, place the switch in position, press the
black cover, and turn on the internal reading lamp.
BEFORE YOU DRIVE
Turn off the reading lamp
Press , to turn off the internal reading lamp.
With the doors closed, place the switch in position, press the
black cover, and turn on the internal reading lamp.
Rear ceiling reading lamp
On/off switch
When the front ceiling reading lamp is in the door control mode, and
all doors are closed, press the ,turn on the rear ceiling reading
lamp, and press the again, turn off the rear ceiling reading lamp.
When any door is opened, rear ceiling reading lamps will go on. About
30s after the door is closed, rear ceiling reading lamps will go off
automatically. When any door is opened, rear ceiling reading lamps
will go on. About 30s after the door is closed, rear ceiling reading
lamps will go off automatically.
Note: 15min after any door Is opened, rear ceiling reading lamps will
go off automatically to prevent battery drain.
USB port
The USB ports are located in the storage box of floor console, at the
rear bottom side of central armrest, and on the left rear side armrest.
Please do not use the USB port for a long time when the ignition
switch is placed in ACC position, which may lead to battery drain.
The USB port in the storage box of floor console
The USB port in the storage box of floor console can be used for
charging and multimedia files play back, please refer to "MP3+Radio" and
“MP5+Radio” in this section for the method of multimedia file playback
via USB and the file requirements.
Caution