MG Gloster, Руководство пользователя, Страница: 120 / 264

112 113
STARTING AND DRIVING
On the premise of meeting starting conditions, lay the key flat in the
position with an identification in the storage box which is in front of the
central armrest and press the start-stop button. Then the engine can be
started.
Emergency Flame out
If you need to shut down the vehicle immediately during driving due to
an emergency, there are two methods to shut down the engine:
1 Keep pressing the start-stop switch within 3s.
2 Press the start-stop switch for continuous 3 times.
Engine Immobilizer System
Keys
The keys have been coded electronically for your vehicle. The coded
keys can be used for the corresponding vehicle only. Only the keys
attached with the vehicle can start your engine.
The engine can not be started only when the remote key is in the vehicle.
When the immobilizer system is effective, any illegal behavior to start
the engine will be prohibited.
Enable/disable
When the start-stop switch is placed in ON position, if the
authentication succeeds, the IMMO warning lamp (yellow) on the
instrument cluster will keep off for a long time. If the IMMO warning
lamp (yellow) flashes, it is shown that the immobilizer system goes
wrong and the engine cannot be started. Contact a service provider
authorized by the Company for overhaul immediately. If the remote key
is not in the vehicle or there is certain interference, the information
center on the combination cluster will display the prompt "Key not in
the vehicle". If the battery of remote key shall be replaced, the
information center on the combination cluster will display the prompt
"Please replace the battery of remote key". Please replace the battery of
remote key as soon as possible.
Note: The remote key contains a microchip which guarantees the
STARTING AND DRIVING
and the vehicle. Do not shield the key with a metal object (such as
another key). Prevent it from severe impact. The quantity of keys
hung on the key ring shall not exceed 1.
Start/Stop the Engine
Starting
CO is a harmful gas and may cause coma, even death.
Avoid inhaling vehicle exhaust because it contains
colorless and odorless CO. Do not start the engine or
keep the engine running in an airtight and unventilated
place. If you find there is exhaust in the vehicle, find out
the cause as soon as possible and correct. If you have to
operate In this kind of environment, please open all
windows completely.
• Automatic Transmission
Place the shift lever in P or N position.
Depress the brake pedal and hold.
Place the ignition switch in ON position, and wait for the “glow plug
indicator lamp (yellow)" on the instrument cluster to go off. Press the
start-stop switch to START position to start the engine. After the
engine begins running, release the start-stop switch immediately, and
the ignition switch will automatically return to ON position. Please refer
to "Ignition Switch" and “Keyless Start System" in this section.
Note: During starting, do not keep the starter running for 10s
above. ff the engine is not started, wait for at least 30s after turning
off the ignition switch and try again. As the ambient temperature
declines, the engine starting time may increase correspondingly.
Therefore, please turn off all