MG Gloster, Руководство пользователя, Страница: 92 / 264

84 85
BEFORE YOU DRIVE
The operation of MODE is invalid in the OFF state, the mode will
recover the non-defrosting mode memorized before powered off.
MODE button can be operated to switch the modes in AUTO state,
while the mode control will change to the manual control from AUTO
control, the AUTO indicator goes off and other features maintain in
AUTO state.
Front A/C air volume selection button
There are 2 front A/C air volume selection buttons: the air
button and air volume - button. there are totally 8 air volume levels, the
air volume indication is displayed on the entertainment system large-
screen display.
The air volume of A/C increases by one level once the air
button is pressed; the air volume decreases by one level once the air
volume- button is pressed.
When the air button is pressed more than 1 seconds, the
volume increases to the top level slowly; When the air volume -button is
pressed more than 1 seconds, the volume reduces to the minimum level
slowly.
If the air or- button is pressed in OFF state, the system starts,
the volume level indicator shows the level before power off directly, the
air volume slowly increases to this level from level one and other
function maintains the non-defrosting state last activated before
OFF button
When the panel is in the working state, press the OFF button, the A/C
panel enters the off state, the A/C output is closed, the air volume is 0,
the mode motor, heating and cooling motor, and internal and external
circulation motor stop after running to the target position.
In the off state, it can be turned on by operating the AUTO mode
button, the front defrost button, the A/C button and the air volume
adjusting button.
If the engine stalls, the A/C control panel will memorize the power state
before stalling, when the vehicle is powered on again, this panel will go
back to the non-defrosting mode last activated before stalling.
In the off state, the internal/extemal circulation indicator lamp, the rear
defrost indicator lamp on the panel indicate their current state, and
other indicator lamps go out.
SYNC button
The SYNC button is the button to switch the synchronization and
asynchronization of front A/C left and right dual zones.
The indicator lamp On indicates the single zone mode, while the
indicator lamp Off indicates the dual zone mode.
When the SYNC indicator lamp is on, the user may operate the
temperature setting knob at driver side to adjust the temperature at the
front passenger side, so that the set temperature at driver side and front
passenger side changes synchronously.
BEFORE YOU DRIVE
When the SYNC indicator lamp is off, the user may adjust the set
temperature at driver side or front passenger side without affecting
each other.
Temperature Selection Knob
Adjust the A/C set temperatures at driver side or front passenger side.
The temperature selection knob can be rotated and adjusted within
360°, if it is rotated counterclockwise, the set temperature is reduced; if
it is rotated clockwise, the set temperature is rising. The set
temperature range is LO, 18"C - 32"C, HI, the temperature increment is
1 "C if it is rotated one grade, and this set temperature will be displayed
on the infotainment display. LO indicates MAX cooling, HI indicates
MAX heating.
The first power-on temperature (factory configuration) is the middle
level, and the corresponding LCD display is 25"Co.
The temperature value will be memorized at the time of shutdown.
A/C Button
Switch on and off the compressor.
If A/C button is pressed regardless of Power OFF or ON, the
corresponding indicator comes on and the infotainment display shows
the NC startup information, and the compressor is activated (vehicle is
started); if the NC button is pressed a second time, the A/C button
indicator goes off and the compressor is turned off.
A/C is controlled automatically in AUTO mode, and it changes to the
manual control from AUTO control by operating the A/C button, then
AUTO indicator goes off, other features maintain in AUTO mode.
Front Defrost Button
Adjust the air distribution mode to Front Defrost.
If the Front Defrost button is pressed in OFF or ON state, the
corresponding indicator comes on and MAX defrost is shown on the
infotainment display. The volume level increases to the 6th level slowly
with the automatic system control, the external circulating air enters
into the vehicle, AC is turned on and the blower air distribution mode is
the maximum defrost. However, the internal/external circulation
mode, the air volume and NC are adjustable.
In Front Defrost state, if the Front Defrost button or MODE button is
pressed a second time, the front defrost function is turned off, the front
defrost indicator goes off and the system returns to the previous state
before the front defrost. If the previous state is OFF, it will return to the
non-defrosting state before powered off.
Rear Defrost Button
Switch on the rear defrost state. Rear defrost can be activated only
when the ignition switch is turned to On position. The operation of the
Rear Defrost button will not change another air conditioning states
regardless of power on or off, meanwhile the corresponding indicator
and the rear defrost information on the infotainment display vary
according to the rear defrost state (vehicle is started).