MG Gloster, Руководство пользователя, Страница: 124 / 264

116 117
STARTING AND DRIVING
Shutdown and startup of engine
Vehicles with automatic transmission
Please conduct a full braking to the vehicle; after the vehicle is stationary,
keep depressing the brake pedal to shut down the engine (engine stop
phase). Meanwhile, the "Intelligent
Start/Stop System Indicator lamp {green)" on the information
center of the instrument cluster illuminates.
Once the brake pedal is released, the engine will be started again. If the
parking assist function is activated, the engine will re-started only when
the accelerator pedal is depressed. The indicator lamp goes out.
Additional information about the vehicle with automatic
transmission
• Only when the shift lever is in D position will engine be shut down.
• If the shift lever is moved out of the D position during the engine stop
phase, the engine will be started again.
• Regardless of whether the engine is shut down or not, you can reduce
or increase the braking force at your own. For stop-and-go driving or
cornering, if the brake is slightly depressed, the engine will not stop
while the vehicle is stationary. Once the brake pedal is depressed
hard, the engine will be shut down immediately.
When the engine is shut down, please depress the brake pedal to
avoid vehicle slip. If the engine intelligent start/stop system switch
on the floor console is pressed during the engine stop phase, the
engine will get started automatically. If the driver door is opened or
the driver seat belt is unfastened, the engine will not get started
automatically; to start the engine, please move the shift lever to P or
N position, and then start the engine with the start button or key.
Caution
STARTING AND DRIVING
Instructions
Normal intelligent start/stop action may be interrupted due to
different system conditions.
The engine is not shut down
Before and during the engine stop, the system will check whether the
particular conditions have been met. Under any of the following
circumstances, the engine will not be shut down:
• The engine has not yet reached the minimum temperature at
which the start/stop system can operate.
• The windshield is being defrosted.
• The battery charging status is too low.
• After the replacement or reconnection of the battery, the vehicle is
not locked for more than 4h.
• The shift lever is not in the D position.
• The slope is very steep.
• The altitude is very high.
• The braking vacuum is insufficient.
• The engine MIL/ESP MIL illuminate.
When the start/stop conditions are not met, the "Intelligent Start/Stop
System Indicator Lamp (white)" illuminates.
T he angina gets started again automatically
During the engine stop phase, under any of the following
circumstances, the normal start/stop operation will be interrupted.
The engine gets started again without the action of the driver.
• The vehicle rolls like on a slope.
• The windshield is being defrosted.
• The battery charging status is too low.
• High current consumption.
• The braking vacuum is reduced.
If the conditions for intelligent start/stop operation are met again, the
engine may be shut down again.
• On vehicles equipped with automatic transmission, if you shift to
D gear after moving into reverse gear, then you must drive the
vehicle at a speed of 10 km/h first to facilitate the system's
shutdown of the engine again.
• If you do not want to use the system, you can turn it off manually.
Press the engine intelligent start/stop system switch on the
floor console, the start/stop system will be turned off; and then
the dialog box that "Start/Stop System Off” will displayed in the
information center of the instrument cluster.
• When the "Intelligent Start/Stop System Indicator Lamp
(yellow)" illuminates, it indicates that the system has a
malfunction! The function is disabled.
• The intelligent start/stop system has a malfunction. Please contact
our Service Dealer for troubleshooting.
Caution