MG Gloster, Руководство пользователя, Страница: 135 / 264

126 127
STARTING AND DRIVING
Precautions for Cold Weather
It is prohibited to use lamp oil (kerosene) as the additive.
In order to reduce possible problems which may occur in cold weather,
please consider the following suggestions:
• Please use the fuel conforming to winter requirements.
• Park the vehicle in an area which can maintain the fuel temperature
above -9ºC.
• Fill the fuel tank after driving every day. This practice will reduce the
possibility of fuel condensation and accordingly reduce the influence
of water generated due to temperature rise after condensation on oil
quality.
• Replace the element of fuel filter according to the recommended
time interval.
• Maintain the battery power in normal state.
The following driving precautions will help you to save
fuel and protect the environment.
• Ensure the tyre pressures are correct.
• Avoid accelerating immediately after starting, and
avoid depressing the accelerator pedal all the way
down.
• The driving time at low gears shall not be excessively
long.
• Try to use the top gear when the engine runs steadily.
• Pre-consider possible barriers, crossroads, sharp
bends or traffic lights, and adjust vehicle speed
correspondingly In advance.
• If it is predicted that the traffic may be blocked for a
long time or it is required to wait for a long time,
please shut down the engine if allowed by safety
conditions.
Additive may degrade the lubricating property of fuel, accelerating
wear and damage of engine and fuel injector.
Caution
STARTING AND DRIVING
Urea
When the "Urea Warning Lamp (yellow)" on the instrument
pack illuminates, the user needs to replenish the urea solution for motor
vehicles in time. The urea solution for motor vehicles used needs to
meet the standards of 1SO22241-1 :2006.
Urea refilling
Do not mix urea with engine oil, kerosene, paraffin,
water or other liquids, which may cause damage to the
urea system. The rated volume of the urea tank is 17L. It
is recommended to use a standard urea gun for refilling.
The number of refills after the gun jumps must not be
more than twice. If refilling urea with other simple tools,
users need to refill according to their estimation on
remaining urea. Do not refill too much urea, so that It
can be seen or overflowed from the filling hole, posing a
danger of coming into contact with urea to yourself and
others.
Before opening the urea filler port, first open the fuel filler flap opening
switch located on the driver door, and open the fuel filler flap from
vehicle inside. The urea filler port is located to the left of the fuel filler
port.
Turn the urea filler cap counterclockwise, remove the urea filler cap to
allow urea filling. After filling, tighten the urea filler cap clockwise, and
then close the fuel filler flap.
Note: The color of the urea filler cap is blue, and the text on the
cap is AdBlue.