85 - 85 021537/06/10
Parameter description:
0..30 Number of definitions to be deleted at the end of the user-specific telegram.
Range of values 0..30
Initial value: No initial value
Command US
<id>US<para5> Save user-specific telegram definition (User telegram Save )
Access: User mode
Description: This command can be used to store the current definition of the user-specific telegram
in the EEPROM. All changes made with the commands UA, UR and UT are not
permanently saved. The command US is used to store definitions in the EEPROM.
The data generated can be interrogated using the command TR6 or TT6: see also
Command TR, Command TT
Parameter description:
2: Saves the telegram definition in the internal EEPROM.
Range of values 2
Initial value: No initial value
Command UT
<id>UT<para5> User-specific telegram (User Telegram)
Access: Enquiry mode
Description: This command can be used to create a new definition of the user-specific telegram.
Any existing definition is overwritten: see also User-specific telegram, Command US.
The data generated can be interrogated using the command TR6 or TT6: see
Command TR, Command TT
Range of values Character string
Initial value: No initial value
Command VC
<id>VC<para5> Constant velocity correction (Velocity Correction)
Access: Configuration mode
Description: Specifies the factor used to correct the velocity. Specification is made "per mil". This
factor must not be changed.
Range of values 0..2000
Initial value: 1055