MetalMaster Chassis system 3.0, Инструкция по эксплуатации

Страница: 3 / 60

1.
Foreword
Thank you for choosing my Graflex Lightsaber Chassis for your own Graflex based Lightsaber
project.
The mb-sabers Graflex chassis design has been continuously developed and improved for over 3
years. MB-sabers focused on this one chassis design to create the best possible chassis for Graflex
based Lightsaber.
A lot of experience and passion has gone into this design. And of course mb-sabers will continue to
work on improving this chassis and adapting it to customer needs in the future.
The Metal Master chassis design allows individual parts to be simply exchanged for the old version
after further development. This often allows a complete chassis to be updated without having to
re-buy all parts.
For creative design
The metal Master chassis gives a lot room for individual custom designs.
Use the basic chassis parts and add self designed parts and elements to it. Especially the crystal
chamber and the plasma gate can easily be modified.
For experienced hobbyists
Editing and assembling the individual parts is not easy. 3D printed parts are not that accurate as
CNC machined parts. Adjustments always have to be made. A proper workspace and professional
tools are absolutely necessary. I only recommend building one of my chassis for experienced
hobbyists.
Responsibility
3D printed metal is conductive. The installation of all electronic parts must be done with care! MB-
Sabers cannot be held responsible for improper use or assembly of the Metal Master Saber
Chassis.
Print materials
The Metal Master chassis is specially developed for metal 3D printing. Most parts are available as
3D prints. These parts are designed for precious metal materials. These materials have the best
accuracy and usability. They can be drilled, cut and tapped very easy.
However, most parts are also available in steel or nylon plastic.
3