MetalMaster Chassis system 3.0, Инструкция по эксплуатации

Страница: 16 / 60

Steel parts in general:
Steel parts do not fit without sanding.
Each part has to be sanded. Take your time. For steel parts use your Dremel or Proxxon power tool
with a grinding head.
For the finish use a belt sander ( 80 grit and 180 grit ).
There are several areas which have to be sanded to make sure all parts fit together.
For the holes use small (2mm) grinding heads with your Dremel and small round hand files.
Standard Steel material cannot be drilled . Always use grinding heads, sand-paper or a diamond
file.
Steel parts which need more attention:
Battery cover Metal Master 07 (steel)
It is also necessary to sand down well the
rough surface inside the battery section from
part 07 (battery cover).
The battery has to have enough space to lay
in the battery cover loosely.
The battery cover
must fit easily! This is very important.
16