manualshive.com logo in svg

Mercury 40 FourStroke Tiller Handle, Инструкция по эксплуатации, техническому обслуживанию, гарантии и установке, Страница: 5 / 107

Поделиться
Скачать
Mercury 40 FourStroke Tiller Handle Скачать руководство пользователя страница 5

WARRANTY INFORMATION

Warranty Registration United States and Canada.............................................. 1

Transfer of Warranty United States and Canada................................................1

Transfer of Mercury Product Protection (Extended Service Coverage) Plan

United States and Canada..................................................................................2

3 Year Limited Warranty Against Corrosion....................................................... 2

Warranty Coverage and Exclusions................................................................... 4

U.S. EPA Emissions Limited Warranty............................................................... 6

Emission Control System Components.............................................................. 6

California Emissions Limited Warranty............................................................... 7

California Air Resources Board Explanation of Your California Emission Control

Warranty Statement............................................................................................ 9

Emission Certification Star Label...................................................................... 10

Warranty Policy—Australia and New Zealand.................................................. 11

Global Warranty Charts Outboard and Jets......................................................15

General Information

Boater's Responsibilities................................................................................... 20

Before Operating Your Outboard...................................................................... 20

Boat Horsepower Capacity............................................................................... 20

High‑Speed and High‑Performance Boat Operation........................................ 21

Lanyard Stop Switch......................................................................................... 21

Protecting People in the Water......................................................................... 24

Passenger Safety Message ‑ Pontoon Boats and Deck Boats.........................24

Wave and Wake Jumping................................................................................. 26

Impact with Underwater Hazards......................................................................27

Safety Instructions for Hand‑Tilled Outboards.................................................. 28

Exhaust Emissions........................................................................................... 28

Selecting Accessories for Your Outboard......................................................... 30

Safe Boating Recommendations...................................................................... 30

Recording Serial Number................................................................................. 33

40 FourStroke Specifications............................................................................ 33

Component Identification.................................................................................. 35

Transporting

Trailering Boat/Outboard ................................................................................. 36

eng

iii

  

Содержание 40 FourStroke Tiller Handle












































































































Отзывы:

Нет отзывов