Mercedes-Benz Zetros 2020, Руководство по эксплуатации

Страница: 92 / 212

Display messages
Possible causes/consequences and
M
Solutions
I
Instrument cluster
display and con‐
trols faulty
The CAN connection to the instrument cluster is interrupted.
The display of the on-board computer can no longer show important
information about the operating and road safety of the vehicle.
X Drive with even greater care.
X
Have the instrument cluster checked at a qualified specialist
workshop.
b s
The entire exterior lighting of the vehicle is electronically monitored.
When the event window is shown, a bulb has failed. The event win-
dow contains information about fault location and fault assistance,
e.g. Replace light bulb. Left dipped beam faulty or
Visit workshop. Left dipped beam faulty
.
If the event window displays "Replace bulbs":
X Replace the corresponding bulb (
Y
page 48).
If you do not switch off the lighting system before replacing a
bulb, it will be necessary to reset the event window afterwards.
To do this, switch on the corresponding light or, if necessary, turn
the ignition off and on again.
or
X
For LED bulbs and xenon bulbs, consult a qualified specialist
workshop.
If the event window displays "Visit workshop":
X
Consult a qualified specialist workshop.
Red event window
Notes
Important safety notes
If you ignore warning and indicator lamps and the event window, you will not be able to recog-
nise failures and malfunctions in components or systems. Driving/braking characteristics may
be affected and the operating and road safety of your vehicle may be limited. Have the affected
system checked and repaired at a qualified specialist workshop. Always observe the warning
lamps and event window and follow the corresponding measures.
Red event window
For a malfunction of high priority, the on-board computer shows a red event window. The on-
board computer shows a red event window, e.g. for low brake reservoir pressure. Immediately
stop the vehicle while paying attention to the traffic conditions and contact a qualified specialist
workshop. If further information about the malfunction is available, the event window displays
the
Û
symbol. You can display the information using the
u
button on the multifunction
steering wheel. Observe the information and instructions in the event window.
90
On-board computer event window
On-board computer and displays