Mercedes-Benz Zetros 2020, Руководство по эксплуатации

Страница: 175 / 212

Fire extinguisher
Tyre pressure gauge
Spare bulbs
Hand crank for
removing the spare
wheel
Jack
i Depending on the equipment, the jack has
a maximum weight of 14.3 kg.
The maximum jack payload can be found on
the sticker attached to the jack.
Following a malfunction, please contact a
qualified specialist workshop.
Jack maintenance
X After usage: clean all moving parts and
reapply grease to them.
X
Every six months: completely extend and
retract the piston.
Pump lever (two-part)
G
WARNING
If you do not assemble the pump lever as
described, the handle can slip out of the
guide while pumping. There is a risk of
injury.
Make sure that the locking pin of the pump
lever is engaged in the hole intended for the
purpose.
Use the pump lever to operate:
R
the jack
R
the wheel wrench
R
the spare wheel winch
:
Cut-out for operating the lowering screw
on the jack
;
Wheel wrench bracket (to loosen/tighten
the wheel nuts)
=
Retaining pin
?
Cut-out for operating the winch
A
Recess for the locking pin
B
Retaining sleeve for inserting the hand
crank (spare wheel hoist operation)
X
To assemble the pump lever: insert the
pump lever into the second half of the pump
lever using locking pin
=
to lock it in place
in recess
A
.
X
To disassemble the pump lever: press
locking pin
=
and pull apart the pump
lever.
Chock
Storage location of the wheel chock
Depending on the vehicle version and equip-
ment, the storage location of the wheel chocks
may vary.
Where will I find...?
173
Breakdown assistance
Z