Mercedes-Benz Zetros 2020, Руководство по эксплуатации

Страница: 148 / 212

Engine oils
Notes on engine oils
Observe the safety notes on service products
(
Y
page 145).
! Engine oils of a different quality grade are
not permissible and may damage the
engine.
Only use engine oils that comply with the
Mercedes-Benz Specifications for Service
Products:
R
on vehicles without BlueTEC
®
exhaust gas
aftertreatment, only use multi-grade engine
oils compliant with Sheet
No. 228.3/.31/.5/.51.
R
on vehicles with BlueTEC
®
exhaust gas
aftertreatment, only use multi-grade engine
oils compliant with Sheet
No. 228.3/.31/.5/.51.
Using engine oils that have not been approved
could restrict your warranty entitlements.
Mercedes-Benz particularly recommends
engine oils that comply with
Sheet No. 228.5/.51 of the Mercedes-Benz
Specifications for Service Products.
These engine oils are of a high standard of
quality and have a beneficial effect on:
R
engine wear
R
fuel consumption
R
exhaust emissions
i You can find information on the quality
grade, e.g. Sheet No. 228.5, and the viscos-
ity, e.g. SAE class 5W-30 from the designa-
tion on the oil container.
Scope of use
R
Multi-grade oils which comply with Sheet
No. 228.3/.31/.5/.51 can be used all year
round. Depending on fuel quality (sulphur
content or fatty acid methyl ester FAME), oil
change intervals must be shortened.
X
Set the sulphur content using the on-board
computer (
Y
page 80).
Oil change
!
If you do not use oil for all-year-round
operation in your engine, change the engine
oil right at the beginning of the cold season.
Use only an approved engine oil in the
specified SAE classification.
If the SAE class (viscosity) of the engine oil
used is not suitable for continually low out-
side temperatures below −20 †, this could
cause engine damage.
The specified temperatures of the SAE class
always refer to freshly added oil. Engine oil
ages during driving due to soot and fuel resi-
due. This impairs the characteristics of the
engine oil, particularly at low outside tem-
peratures.
Mercedes-Benz strongly recommends that,
at outside temperatures below −20 †, you
use engine oils of SAE class 5W-30.
Oil change intervals are dependent on the fol-
lowing:
R
the operating conditions of the vehicle
R
the grade of the engine oil used
R
the quality of the fuel
The display automatically shows the date of
the next oil change.
X
Select the SAE class of the engine oil in
accordance with outside temperatures.
X Set the SAE viscosity class and Sheet No.
(quality grade) of the engine oil in the on-
board computer (
Y
page 80).
i You can only achieve the maximum oil
change intervals by using engine oils of par-
ticularly high quality (e.g. in accordance with
Sheet No. 228.5 of the Mercedes-Benz
Specifications for Service Products).
146
Operating fluids
Maintenance and care